Opel Omega
since 1993-1999 of release
Repair and car operation
Opel Omega
+
1. Maintenance instruction
+
2. Maintenance
-
3. Repair of engines
+
3.1. SOHC engines in volume 2,0 liters
+
3.2. DOHC engines in volume 2,0 liters
-
3.3. Engines in volume 2,5 and 3,0 liters
3.3.1. Technical characteristics
3.3.2. Compression check
3.3.3. Top dead point (VMT) of the N1 piston
3.3.4. Covers of camshafts
3.3.5. Pulley of a cranked shaft
3.3.6. Covers of a gas-distributing belt
3.3.7. Gas-distributing belt
3.3.8. Natyazhitel of a belt, asterisks and intermediate pulleys
3.3.9. Epiploons of camshafts
3.3.10. Camshafts and pushers
3.3.11. Head of cylinders
3.3.12. Oil pallet
3.3.13. Oil pump
3.3.14. Oil radiator
3.3.15. Flywheel and leading disk
3.3.16. Epiploons of a cranked shaft
3.3.17. Engine and transmission fastenings
+
3.4. Partition of all petrol engines
+
3.5. Diesel engine in volume 2,0 liters
+
3.6. Diesel six-cylinder 2,5-liter engine
+
4. Heating system and ventilation
+
5. Fuel, exhaust systems
+
6. System of start of the engine
+
7. Ignition system
+
8. Coupling
+
9. Transmissions
+
10. Main transfer, semi-axes
+
11. Brake system
+
12. Suspension bracket and steering
+
13. Body
+
14. Body electric equipment
3.3.9. Epiploons of camshafts
Replacement
PERFORMANCE ORDER
1.
Remove a camshaft asterisk.
2.
Drill two small openings in an old epiploon.
3.
Screw in screws and take an epiploon.
4.
Clean a groove of an epiploon and remove agnails.
5.
Oil a new epiploon and establish it into place.