Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Repair of engines
+ 3.1. SOHC engines in volume 2,0 liters
+ 3.2. DOHC engines in volume 2,0 liters
+ 3.3. Engines in volume 2,5 and 3,0 liters
+ 3.4. Partition of all petrol engines
- 3.5. Diesel engine in volume 2,0 liters
3.5.1. Technical characteristics
3.5.2. Repair operations on the engine established in the car
3.5.3. Check of pressure of compression 3_5_4.htm
3.5.5. Gazoraspredeleniye mechanism
3.5.6. Cover of a head of the block of cylinders
3.5.7. Pulley of a cranked shaft
3.5.8. Chain cover
3.5.9. Natyazhiteli of a chain
3.5.10. Chains and asterisks
3.5.11. Camshafts and pushers
3.5.12. Head of the block of cylinders
3.5.13. Oil pallet
3.5.14. Oil pump
3.5.15. Oil radiator
3.5.16. Sealing rings of a cranked shaft
3.5.17. Flywheel
3.5.18. Suspension brackets of the power unit
+ 3.5.19. Major maintenance of the diesel engine in volume 2,0 liters
+ 3.6. Diesel six-cylinder 2,5-liter engine
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
|
The following operations can be carried out, without removing the engine from the car:
– to check pressure of compression;
– removal and installation of a cover of a head of the block of cylinders;
– removal and installation of a casing of a chain;
– removal and chain installation;
– removal and installation of a natyazhitel of a chain;
– removal and installation of a camshaft and pushers;
– removal and installation of a head of the block of cylinders;
– removal and installation of pistons and rods;
– removal and installation of the oil pallet;
– removal and installation of the oil pump;
– removal and installation of an oil radiator;
– replacement of sealing rings of a cranked shaft;
– replacement of support of the power unit;
– removal and flywheel installation. |
|