Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Repair of engines
   + 3.1. SOHC engines in volume 2,0 liters
   + 3.2. DOHC engines in volume 2,0 liters
   + 3.3. Engines in volume 2,5 and 3,0 liters
   + 3.4. Partition of all petrol engines
   - 3.5. Diesel engine in volume 2,0 liters
      3.5.1. Technical characteristics
      3.5.2. Repair operations on the engine established in the car
      3.5.3. Check of pressure of compression 3_5_4.htm
      3.5.5. Gazoraspredeleniye mechanism
      3.5.6. Cover of a head of the block of cylinders
      3.5.7. Pulley of a cranked shaft
      3.5.8. Chain cover
      3.5.9. Natyazhiteli of a chain
      3.5.10. Chains and asterisks
      3.5.11. Camshafts and pushers
      3.5.12. Head of the block of cylinders
      3.5.13. Oil pallet
      3.5.14. Oil pump
      3.5.15. Oil radiator
      3.5.16. Sealing rings of a cranked shaft
      3.5.17. Flywheel
      3.5.18. Suspension brackets of the power unit
      + 3.5.19. Major maintenance of the diesel engine in volume 2,0 liters
   + 3.6. Diesel six-cylinder 2,5-liter engine
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment


3.5.15. Oil radiator

GENERAL INFORMATION

The oil radiator is established on a forward left part of the block of cylinders of the engine. On engines till 1998 the oil radiator is placed in a casing of the oil filter, and on models since 1998 fastens bolts to a forward part of a casing of the oil filter.

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports.
Models till 1998.
2. Press hoses of supply of cooling liquid to an oil radiator. Weaken collars and remove hoses from a radiator.
3. Wipe area about a casing of the oil filter, unscrew bolts and remove a casing and laying from a head of the block of cylinders.
4. Unscrew screws and uncover an oil radiator (drawing at the left) and laying a forward part of a casing of the oil filter (drawing on the right).
5. Unscrew bolts from a back part of a casing of the oil filter
6. Remove an oil radiator (drawing at the left) together with sealing rings (are specified by shooters in drawing on the right).
Models with 1998г.
7. Press hoses of supply of cooling liquid to an oil radiator. Release collars and remove hoses from an oil radiator.
8. Wipe area about an oil radiator, unscrew bolts and remove an oil radiator and laying from a casing of the oil filter.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. Thus it is necessary to establish new laying and sealing rings.