Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Repair of engines
- 3.1. SOHC engines in volume 2,0 liters
3.1.1. Technical characteristics
3.1.2. Compression check
3.1.3. Top dead point (VMT) of the N1 piston
3.1.4. Camshaft cover
3.1.5. Pulley of a cranked shaft
3.1.6. Covers of a gas-distributing belt
3.1.7. Gas-distributing belt
3.1.8. Natyazhitel of a gas-distributing belt and asterisk
3.1.9. Camshaft epiploon
3.1.10. Casing of a camshaft and camshaft
3.1.11. Pushers and hydraulic lifts
3.1.12. Head of cylinders
3.1.13. Oil pallet
3.1.14. Oil pump
3.1.15. Flywheel
3.1.16. Epiploons of a cranked shaft
3.1.17. Engine and transmission fastenings
+ 3.2. DOHC engines in volume 2,0 liters
+ 3.3. Engines in volume 2,5 and 3,0 liters
+ 3.4. Partition of all petrol engines
+ 3.5. Diesel engine in volume 2,0 liters
+ 3.6. Diesel six-cylinder 2,5-liter engine
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
|
Removal
| PERFORMANCE ORDER |
| 1. Remove an additional driving belt. |
| 2. Unscrew the small bolts, fixing a pulley to an asterisk of a cranked shaft. Remove a pulley. |
|
Installation
| PERFORMANCE ORDER |
| 1. Put on a pulley and tighten bolts. |
| 2. Put on a driving belt. |
|
|
|