Opel Omega

since 1993-1999 of release

Repair and car operation


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Repair of engines
   - 3.1. SOHC engines in volume 2,0 liters
      3.1.1. Technical characteristics
      3.1.2. Compression check
      3.1.3. Top dead point (VMT) of the N1 piston
      3.1.4. Camshaft cover
      3.1.5. Pulley of a cranked shaft
      3.1.6. Covers of a gas-distributing belt
      3.1.7. Gas-distributing belt
      3.1.8. Natyazhitel of a gas-distributing belt and asterisk
      3.1.9. Camshaft epiploon
      3.1.10. Casing of a camshaft and camshaft
      3.1.11. Pushers and hydraulic lifts
      3.1.12. Head of cylinders
      3.1.13. Oil pallet
      3.1.14. Oil pump
      3.1.15. Flywheel
      3.1.16. Epiploons of a cranked shaft
      3.1.17. Engine and transmission fastenings
   + 3.2. DOHC engines in volume 2,0 liters
   + 3.3. Engines in volume 2,5 and 3,0 liters
   + 3.4. Partition of all petrol engines
   + 3.5. Diesel engine in volume 2,0 liters
   + 3.6. Diesel six-cylinder 2,5-liter engine
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment



3.1.11. Pushers and hydraulic lifts

WORK WITH N KM-565 TOOL USE

PERFORMANCE ORDER
1. Uncover a camshaft.
2. Turn a cranked shaft so that the cam of a camshaft of that pusher which you are going to remove, was directed strictly up. Unscrew a spark plug from the corresponding cylinder.
3. Fix the special tool on a casing of a camshaft and remove a pusher, the hydraulic lift and a persistent lining from the top part of the valve.
4. Oil the removed details and establish on the places.

WORK WITHOUT THE SPECIAL TOOL

Removal

PERFORMANCE ORDER
1. Remove a camshaft casing.
2. Prepare eight numbered boxes.
3. Remove from valves pushers.
4. Remove hydraulic lifts.
5. Remove persistent linings.
6. Combine details of each of valves in the corresponding box.

Check

PERFORMANCE ORDER
Examine the removed details on existence of wear tracks and damages. If necessary replace the worn-out and damaged details.

Installation

PERFORMANCE ORDER
1. Grease lifts and openings of lifts in a head of cylinders with oil.
2. Establish persistent linings.
3. Oil pushers and establish them on the places.