Opel Omega
since 1993-1999 of release
Repair and car operation
Opel Omega
+
1. Maintenance instruction
+
2. Maintenance
-
3. Repair of engines
-
3.1. SOHC engines in volume 2,0 liters
3.1.1. Technical characteristics
3.1.2. Compression check
3.1.3. Top dead point (VMT) of the N1 piston
3.1.4. Camshaft cover
3.1.5. Pulley of a cranked shaft
3.1.6. Covers of a gas-distributing belt
3.1.7. Gas-distributing belt
3.1.8. Natyazhitel of a gas-distributing belt and asterisk
3.1.9. Camshaft epiploon
3.1.10. Casing of a camshaft and camshaft
3.1.11. Pushers and hydraulic lifts
3.1.12. Head of cylinders
3.1.13. Oil pallet
3.1.14. Oil pump
3.1.15. Flywheel
3.1.16. Epiploons of a cranked shaft
3.1.17. Engine and transmission fastenings
+
3.2. DOHC engines in volume 2,0 liters
+
3.3. Engines in volume 2,5 and 3,0 liters
+
3.4. Partition of all petrol engines
+
3.5. Diesel engine in volume 2,0 liters
+
3.6. Diesel six-cylinder 2,5-liter engine
+
4. Heating system and ventilation
+
5. Fuel, exhaust systems
+
6. System of start of the engine
+
7. Ignition system
+
8. Coupling
+
9. Transmissions
+
10. Main transfer, semi-axes
+
11. Brake system
+
12. Suspension bracket and steering
+
13. Body
+
14. Body electric equipment
3.1.4. Camshaft cover
Removal
PERFORMANCE ORDER
1.
Disconnect a ventilating hose from a camshaft cover.
2.
Unscrew bolts and uncover a camshaft.
Installation
PERFORMANCE ORDER
1.
Carefully examine an internal surface of a cover and, if necessary, clean it.
2.
Establish new laying and establish a cover.
3.
Insert and tighten bolts.
4.
Connect a ventilating hose.