Opel Omega

since 1993-1999 of release

Repair and car operation


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Repair of engines
   + 3.1. SOHC engines in volume 2,0 liters
   + 3.2. DOHC engines in volume 2,0 liters
   + 3.3. Engines in volume 2,5 and 3,0 liters
   + 3.4. Partition of all petrol engines
   + 3.5. Diesel engine in volume 2,0 liters
   - 3.6. Diesel six-cylinder 2,5-liter engine
      3.6.1. Removal and engine installation
      3.6.2. Head of cylinders
      3.6.3. Cam-shaft
      3.6.4. Compression check
      3.6.5. Multiridge maple belt
      3.6.6. Pallet of a case and laying
      - 3.6.7. System of cooling of the diesel engine of 2,5 liters
         3.6.7.1. Thermostat
         3.6.7.2. Radiator
         3.6.7.3. The fan with vyazkostny the fan coupling / coupling
         3.6.7.4. Cooling pump
         3.6.7.5. Pipe of the airsupercharger
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment



3.6.7.4. Cooling pump
GENERAL INFORMATION

The pump of the diesel engine is put in action from a maple belt.

Ahead on a shaft of the water pump the radiator fan is screwed.

Removal

PERFORMANCE ORDER
1. Merge cooling liquid.
2. Unscrew the fan with the vyazkostny coupling (the left carving).
3. Remove maple a belt.
4. Release bolts (1) fastening of a pulley of a maple belt. Thus press maple a belt and hold it in order that the pulley was not scrolled.
5. Remove a pulley from a nave.
6. Unscrew 4 bolts (1) fastening of the pump of cooling.
7. Screw in 2 bolts (1) with carving М6 in carving openings and this most evenly squeeze out the water pump from the engine. Thus pay attention to that the pump was not warped.

Installation

PERFORMANCE ORDER
1. Take out bolts, replace a ring for the pump of cooling and manually grease with silicone oil, for example OPEL 19 70 206 (90 167 353).
2. Establish the pump with new laying and evenly screw with effort of 10 N of m.
3. Screw a pulley of a belt 4 bolts and fix them with effort of 10 N of m.
4. Establish and pull maple a belt.
5. Establish the vyazkostny coupling.
6. Fill in cooling liquid and pump over system.
7. Warm up the engine and check hose connection, and also the cooling pump on tightness.