Opel Omega

since 1993-1999 of release

Repair and car operation


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Repair of engines
   + 3.1. SOHC engines in volume 2,0 liters
   + 3.2. DOHC engines in volume 2,0 liters
   + 3.3. Engines in volume 2,5 and 3,0 liters
   + 3.4. Partition of all petrol engines
   + 3.5. Diesel engine in volume 2,0 liters
   - 3.6. Diesel six-cylinder 2,5-liter engine
      3.6.1. Removal and engine installation
      3.6.2. Head of cylinders
      3.6.3. Cam-shaft
      3.6.4. Compression check
      3.6.5. Multiridge maple belt
      3.6.6. Pallet of a case and laying
      + 3.6.7. System of cooling of the diesel engine of 2,5 liters
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment



3.6.4. Compression check
PERFORMANCE ORDER
1. Remove an inlet collector.
2. Unscrew an electric wire (1) from the valve of interruption of supply of fuel on TNVD that fuel was not injected through nozzles into combustion chambers.
3. Unscrew pipelines of injection of cylinders 3 and 4 (2 average cylinders).
Prevention

Following fuel collect a rag.
4. Remove all glow plugs.
5. Screw in компрессометр by means of a flexible connecting hose instead of candles. In masterful OPEL nozzle KM-488 is for this purpose used.
6. Check a compression at number of turns of a starter within 4 seconds. Demanded value: 20th bar, pressure difference: Max. 1,5 bar.
7. Insert injection pipelines, tighten with effort of 20 N of m.
8. Screw in glow plugs, tighten with effort of 25 N of m and connect electric wires.
9. Establish an inlet collector.
10. Connect a wire to the valve of interruption of supply of fuel.