Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Repair of engines
   + 3.1. SOHC engines in volume 2,0 liters
   + 3.2. DOHC engines in volume 2,0 liters
   + 3.3. Engines in volume 2,5 and 3,0 liters
   + 3.4. Partition of all petrol engines
   + 3.5. Diesel engine in volume 2,0 liters
   - 3.6. Diesel six-cylinder 2,5-liter engine
      3.6.1. Removal and engine installation
      3.6.2. Head of cylinders
      3.6.3. Cam-shaft
      3.6.4. Compression check
      3.6.5. Multiridge maple belt
      3.6.6. Pallet of a case and laying
      + 3.6.7. System of cooling of the diesel engine of 2,5 liters
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
торшеры купить торшер и напольные светильники.
maytoni majorca



3.6.5. Multiridge maple belt

Removal

PERFORMANCE ORDER
1. Remove the bottom guard of an impellent compartment.
2. If is available, weaken multiridge maple a conditioner belt on a tension roller (1).
3. Remove the top guard of the engine and a pipe of forced air.
4. Establish a big screw-driver or the similar lever on a tension element.
5. Compress a natyazhitel of a belt and remove multiridge maple a belt.
6. Remove multiridge maple a belt between the fan with the vyazkostny coupling and an air diffuzor.
7. At a lack of a place remove the fan.

Installation

PERFORMANCE ORDER
1. Impose new multiridge maple a belt according to the scheme on pulleys, thus compress a remenny pulley, as at removal. Watch the correct situation in grooves of pulleys.
2. Unload a tension element. Tension force is transferred from a tension element, the height of a tension is not regulated.
3. Establish the top guard of the engine and a pipe of forced air.
4. Where is available, insert multiridge maple a conditioner belt, unload a tension roller.
5. Establish the fan with the vyazkostny coupling.
6. Establish the bottom guard of an impellent compartment.