Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Repair of engines
   + 3.1. SOHC engines in volume 2,0 liters
   + 3.2. DOHC engines in volume 2,0 liters
   + 3.3. Engines in volume 2,5 and 3,0 liters
   - 3.4. Partition of all petrol engines
      3.4.1. Technical characteristics
      3.4.2. Compression check
      - 3.4.3. Engine partition
         3.4.3.1. Major maintenance of the engine
         3.4.3.2. Engine diagnostics by means of the vacuum gage
         3.4.3.3. Compression check in engine cylinders
         3.4.3.4. Major maintenance of the engine - alternatives 3_4_3_5.htm
         3.4.3.6. Block of cylinders of an incomplete complete set
         3.4.3.7. Repair engine (block of cylinders of a full complete set)
      3.4.4. Auxiliary elements of the engine
      + 3.4.5. Engine
      3.4.6. Engine partition
      3.4.7. Head of cylinders and valves
      3.4.8. Pistons and rods
      3.4.9. Cranked shaft
      3.4.10. Block of cylinders
      3.4.11. Radical bearings and bearings of rods
      3.4.12. Piston rings
      3.4.13. The first start of the engine after a partition
   + 3.5. Diesel engine in volume 2,0 liters
   + 3.6. Diesel six-cylinder 2,5-liter engine
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
http://www.norma-stab.ru/stabilizire_vibor.html 7 .



3.4.3.4. Major maintenance of the engine – alternatives

GENERAL INFORMATION

At independent performance of major maintenance various options are possible. The decision on replacement of the block of cylinders, shatunno-piston group and a cranked shaft depends on a number of factors from which the most important is the condition of the block of cylinders. Other reasons are repair cost, possibility of access to the equipment of workshops of car-care center, existence of spare parts, time planned for work, and also personal experience.

Here some of options of performance of major maintenance:

 – acquisition of separate spare parts (see subsection 3.4.3.5);
 – the block of cylinders of an incomplete complete set (see subsection 3.4.3.6);
 – the repair engine (the block of cylinders of a full complete set) (see subsection 3.4.3.7).

Carefully think over, what of alternatives to you best of all approaches. Before purchase or before registration of the order for spare parts consult in a local workshop of car-care center, with suppliers of spare parts, and also with experts in restoration of engines.