Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
- 11. Brake system
   11.1. Technical characteristics
   11.2. Brake overlays of forward brakes
   11.3. Brake overlays of back brakes
   11.4. Support of a forward brake
   11.5. Support of a back brake
   11.6. Brake disk
   11.7. Brake shoes of the hand brake
   11.8. Rope of the hand brake
   11.9. Lever of the hand brake
   11.10. Main brake cylinder
   11.11. Tank of brake liquid and sensor of level of liquid
   11.12. Pumping of brake system
   11.13. Hydraulic tubes and hoses
   11.14. Vacuum hose and valve of the vacuum amplifier of brakes
   11.15. Vacuum amplifier
   11.16. Brake pedal
   11.17. System of anti-blocking of brakes / protivobuksovochny system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment


11.8. Rope of the hand brake

Removal

PERFORMANCE ORDER
1. Remove back and intermediate section of an exhaust system. Remove heat-shielding screens.
2. Turn off fixing bolts of the central bearing of the driveshaft. Establish a support under the central bearing.
3. Turn off an adjusting nut of the balance weight of ropes of the hand brake (it is specified by an arrow), having counted up number of turns, and remove the balance weight from draft.
4. Disconnect springs and ropes from levers of the hand brake on brakes of back wheels.
5. Remove ropes from the car.

Installation

Installation is carried out to sequences, return to removal.