Opel Omega

since 1993-1999 of release

Repair and car operation

Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
- 11. Brake system
   11.1. Technical characteristics
   11.2. Brake overlays of forward brakes
   11.3. Brake overlays of back brakes
   11.4. Support of a forward brake
   11.5. Support of a back brake
   11.6. Brake disk
   11.7. Brake shoes of the hand brake
   11.8. Rope of the hand brake
   11.9. Lever of the hand brake
   11.10. Main brake cylinder
   11.11. Tank of brake liquid and sensor of level of liquid
   11.12. Pumping of brake system
   11.13. Hydraulic tubes and hoses
   11.14. Vacuum hose and valve of the vacuum amplifier of brakes
   11.15. Vacuum amplifier
   11.16. Brake pedal
   11.17. System of anti-blocking of brakes / protivobuksovochny system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment

11.5. Support of a back brake


1. Press the brake hose going to a support.
2. Remove brake slips.
3. Turn off a connection nut.
4. Disconnect a brake tube from a support.
5. Turn off fixing bolts.
6. Remove a support.


1. Clear a support. Remove rings and caps from pistons.
2. By means of the compressed air squeeze out pistons. Remove consolidations.
3. Wash out all elements in pure brake liquid and replace the worn-out or damaged elements.


1. Assembly of elements of a support is carried out upside-down.
2. Grease walls of the cylinder, consolidation and pistons with brake liquid before installation. Establish pistons so that deepenings on pistons were inclined down at an angle approximately in 23 °.


1. Installation is carried out to sequences, return to removal.
2. Tighten fixing bolts of a support till the demanded moment of an inhaling.