Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
- 11. Brake system
   11.1. Technical characteristics
   11.2. Brake overlays of forward brakes
   11.3. Brake overlays of back brakes
   11.4. Support of a forward brake
   11.5. Support of a back brake
   11.6. Brake disk
   11.7. Brake shoes of the hand brake
   11.8. Rope of the hand brake
   11.9. Lever of the hand brake
   11.10. Main brake cylinder
   11.11. Tank of brake liquid and sensor of level of liquid
   11.12. Pumping of brake system
   11.13. Hydraulic tubes and hoses
   11.14. Vacuum hose and valve of the vacuum amplifier of brakes
   11.15. Vacuum amplifier
   11.16. Brake pedal
   11.17. System of anti-blocking of brakes / protivobuksovochny system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment


11.15. Vacuum amplifier

Check

PERFORMANCE ORDER
1. Squeeze out a brake pedal several times to remove depression from the vacuum amplifier.
2. Squeeze out a pedal of a brake and start the engine. The pedal should fall a little.

Removal

PERFORMANCE ORDER
1. Squeeze out a brake pedal several times to remove depression from the vacuum amplifier.
2. Disconnect the connection socket from the sensor of level of brake liquid.
3. Turn off fixing nuts of the main brake cylinder and remove it from the vacuum amplifier.
4. Remove a connecting knee of a vacuum hose.
5. Disconnect a returnable spring from a brake pedal. Remove the switch of fires of a stoplight.
6. Remove a clip and get a pin, a fixing pusher of the vacuum amplifier to a brake pedal.
7. Turn off fixing nuts and remove the vacuum amplifier.

Installation

PERFORMANCE ORDER
1. Twirl a connecting fork on a pusher of the vacuum amplifier so that the distance between a surface of a fixing arm of the amplifier and an opening on a fork was 106,0±0,5 mm. Tighten a lock-nut.
2. Further installation is carried out to sequences, return to removal.