| 1. Turn off a nut of connection of a hose on an inlet collector. |
| 2. Remove a connecting knee from the vacuum amplifier. |
| 3. Remove a hose from fastenings. |
| 4. Cut off a hose from the valve, a connecting knee and connection of an inlet collector. |
| 5. Cut off a new hose of the demanded length and connect it to the valve, a knee and connection of an inlet collector by means of collars. |
| 6. Insert a connecting knee into the rubber plug on the vacuum amplifier and tighten a connection nut on an inlet collector. Establish new fastenings of a hose. |