Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
- 12. Suspension bracket and steering
   12.1. Technical characteristics
   12.2. Rack of a forward suspension bracket
   12.3. Disorder of forward wheels
   12.4. Bottom lever of a forward suspension bracket
   12.5. Spherical hinge of the bottom lever of a forward suspension bracket
   12.6. Stabilizer of cross-section stability of a forward suspension bracket
   12.7. Connecting links of the stabilizer of cross-section stability
   12.8. Rotary pin
   12.9. Nave and bearings of a forward wheel
   12.10. Cross-piece of a forward suspension bracket
   12.11. Shock-absorber of a back suspension bracket
   12.12. Lever of a back suspension bracket
   12.13. Springs of a back suspension bracket
   12.14. Stabilizer of cross-section stability of a back suspension bracket
   12.15. Cross-section drafts of a back suspension bracket
   12.16. System of adjustment of height of a back suspension bracket
   12.17. Back suspension bracket
   12.18. Cross-piece of a back suspension bracket
   12.19. Fastenings of a cross-piece of a back suspension bracket
   12.20. Nave and bearings of a back wheel
   12.21. Steering wheel
   12.22. Steering column
   12.23. Lock steering column / lock of ignition
   12.24. Steering mechanism
   12.25. Steering drafts
   12.26. Steering soshka
   12.27. Pump of system of the hydraulic booster of a steering
   12.28. Adjustment of wheels and corners of turns
+ 13. Body
+ 14. Body electric equipment



12.27. Pump of system of the hydraulic booster of a steering

MODELS WITH THE 4-CYLINDER ENGINE

Removal

PERFORMANCE ORDER
1. Remove a driving belt.
2. Disconnect a tube and a hose from the pump, turn off three fixing bolts and remove the pump.

Installation

Installation is carried out to sequences, return to removal.

MODELS WITH THE 6-CYLINDER ENGINE

Removal

PERFORMANCE ORDER
1. Discharge central air if it is established.
2. Remove a driving belt.
3. Turn off fixing bolts and remove a pump pulley.
4. Disconnect a tube and a hose from the pump.
5. Turn off the fixing screw and disconnect a weight wire from a fixing arm of the pump.
6. Remove a fixing arm from below the pump.
7. Remove the conditioner compressor from a fixing arm of the pump.
8. Turn off three fixing bolts and remove a fixing arm together with the pump.
9. Remove the pump from a fixing arm.

Installation

Installation is carried out to sequences, return to removal.