Opel Omega

since 1993-1999 of release

Repair and car operation


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
- 12. Suspension bracket and steering
   12.1. Technical characteristics
   12.2. Rack of a forward suspension bracket
   12.3. Disorder of forward wheels
   12.4. Bottom lever of a forward suspension bracket
   12.5. Spherical hinge of the bottom lever of a forward suspension bracket
   12.6. Stabilizer of cross-section stability of a forward suspension bracket
   12.7. Connecting links of the stabilizer of cross-section stability
   12.8. Rotary pin
   12.9. Nave and bearings of a forward wheel
   12.10. Cross-piece of a forward suspension bracket
   12.11. Shock-absorber of a back suspension bracket
   12.12. Lever of a back suspension bracket
   12.13. Springs of a back suspension bracket
   12.14. Stabilizer of cross-section stability of a back suspension bracket
   12.15. Cross-section drafts of a back suspension bracket
   12.16. System of adjustment of height of a back suspension bracket
   12.17. Back suspension bracket
   12.18. Cross-piece of a back suspension bracket
   12.19. Fastenings of a cross-piece of a back suspension bracket
   12.20. Nave and bearings of a back wheel
   12.21. Steering wheel
   12.22. Steering column
   12.23. Lock steering column / lock of ignition
   12.24. Steering mechanism
   12.25. Steering drafts
   12.26. Steering soshka
   12.27. Pump of system of the hydraulic booster of a steering
   12.28. Adjustment of wheels and corners of turns
+ 13. Body
+ 14. Body electric equipment



12.24. Steering mechanism

MODELS WITH THE 4-CYLINDER ENGINE

Removal

PERFORMANCE ORDER
1. Establish forward wheels directly.
2. Mark position of the steering lever in relation to the steering mechanism. Turn off a fixing nut and remove the lever from an axis by means of a stripper.
3. Remove the furnish panel under an instrument guard.
4. Turn off a coupling bolt of the bottom fastening of a steering column and disconnect a shaft of a steering column from the steering mechanism.
5. Turn off nuts of connections and disconnect hydraulic tubes from the steering mechanism.
6. Turn off fixing bolts and nuts and remove the steering mechanism.

Installation

Installation is carried out to sequences, return to removal.

MODELS WITH THE 6-CYLINDER ENGINE

Removal

PERFORMANCE ORDER
1. Establish forward wheels directly.
2. Mark position of the steering lever in relation to the steering mechanism. Turn off a fixing nut and remove the lever from an axis by means of a stripper.
3. Turn off fixing bolts and remove filters from the steering mechanism.
4. Disconnect the socket of connection of the steering mechanism.
5. Remove a damper on the right side of the engine and turn off a nut, fixing the right fixing block of the engine to a body.
6. Close the lock of a steering column to prevent rotation of a steering wheel.
7. Disconnect a vacuum hose from the vacuum amplifier of brakes.
8. Let out pressure from a power supply system and disconnect fuel tubes from an inlet collector.
9. Remove a tank of cooling liquid.
10. Disconnect hoses from the coal filter.
11. Mark and disconnect hydraulic tubes (are specified by shooters) from the steering mechanism.
12. Remove the furnish panel under an instrument guard.
13. Turn off a coupling bolt of the bottom fastening of a steering column and disconnect a shaft of a steering column from the steering mechanism.
14. Establish the lift and raise the right side of the engine approximately on 3 see.
15. Remove a starter.
16. Turn off fixing bolts (are specified by shooters) and nuts and remove the steering mechanism.

Installation

Installation is carried out to sequences, return to removal.