Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
- 12. Suspension bracket and steering
   12.1. Technical characteristics
   12.2. Rack of a forward suspension bracket
   12.3. Disorder of forward wheels
   12.4. Bottom lever of a forward suspension bracket
   12.5. Spherical hinge of the bottom lever of a forward suspension bracket
   12.6. Stabilizer of cross-section stability of a forward suspension bracket
   12.7. Connecting links of the stabilizer of cross-section stability
   12.8. Rotary pin
   12.9. Nave and bearings of a forward wheel
   12.10. Cross-piece of a forward suspension bracket
   12.11. Shock-absorber of a back suspension bracket
   12.12. Lever of a back suspension bracket
   12.13. Springs of a back suspension bracket
   12.14. Stabilizer of cross-section stability of a back suspension bracket
   12.15. Cross-section drafts of a back suspension bracket
   12.16. System of adjustment of height of a back suspension bracket
   12.17. Back suspension bracket
   12.18. Cross-piece of a back suspension bracket
   12.19. Fastenings of a cross-piece of a back suspension bracket
   12.20. Nave and bearings of a back wheel
   12.21. Steering wheel
   12.22. Steering column
   12.23. Lock steering column / lock of ignition
   12.24. Steering mechanism
   12.25. Steering drafts
   12.26. Steering soshka
   12.27. Pump of system of the hydraulic booster of a steering
   12.28. Adjustment of wheels and corners of turns
+ 13. Body
+ 14. Body electric equipment



12.21. Steering wheel

MODELS WITHOUT THE MODULE OF THE AIRBAG OF SAFETY

Removal

PERFORMANCE ORDER
1. Establish forward wheels directly.
2. Remove the panel in the center of a steering wheel and disconnect two wires.
3. Turn off a fixing nut and remove a washer.
4. Mark the provision of installation of a steering wheel and remove it.

Installation

Installation is carried out to sequences, return to removal.

MODELS WITH THE MODULE OF THE AIRBAG OF SAFETY


Removal

PERFORMANCE ORDER
1. Before removal of the module of an airbag of safety disconnect a wire of the minus plug of the accumulator and wait at least 1 minute to discharge module condensers.
2. Remove the module of an airbag of safety.
3. Establish forward wheels directly.
4. Mark the provision of installation of a steering wheel and disconnect the socket of connection of the button of a sound signal.
5. Unbend uvulas.
6. Turn off a fixing nut.
7. Remove a fixing nut.
8. Remove a washer.
9. Remove a steering wheel from a steering column.
10. If it is necessary, use a stripper.

Installation

Installation is carried out to sequences, return to removal.