Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
- 12. Suspension bracket and steering
   12.1. Technical characteristics
   12.2. Rack of a forward suspension bracket
   12.3. Disorder of forward wheels
   12.4. Bottom lever of a forward suspension bracket
   12.5. Spherical hinge of the bottom lever of a forward suspension bracket
   12.6. Stabilizer of cross-section stability of a forward suspension bracket
   12.7. Connecting links of the stabilizer of cross-section stability
   12.8. Rotary pin
   12.9. Nave and bearings of a forward wheel
   12.10. Cross-piece of a forward suspension bracket
   12.11. Shock-absorber of a back suspension bracket
   12.12. Lever of a back suspension bracket
   12.13. Springs of a back suspension bracket
   12.14. Stabilizer of cross-section stability of a back suspension bracket
   12.15. Cross-section drafts of a back suspension bracket
   12.16. System of adjustment of height of a back suspension bracket
   12.17. Back suspension bracket
   12.18. Cross-piece of a back suspension bracket
   12.19. Fastenings of a cross-piece of a back suspension bracket
   12.20. Nave and bearings of a back wheel
   12.21. Steering wheel
   12.22. Steering column
   12.23. Lock steering column / lock of ignition
   12.24. Steering mechanism
   12.25. Steering drafts
   12.26. Steering soshka
   12.27. Pump of system of the hydraulic booster of a steering
   12.28. Adjustment of wheels and corners of turns
+ 13. Body
+ 14. Body electric equipment



12.16. System of adjustment of height of a back suspension bracket

System check

PERFORMANCE ORDER
1. Establish the car on an equal surface and start the engine.
2. Measure height of a back suspension bracket.
3. Put heavy cargo in a luggage carrier and check, that within about 20 seconds the height of a suspension bracket returned to initial value – 3–5 see.
4. Clean cargo and check, that the height of a suspension bracket returned to initial value.

COMPRESSOR

Removal

PERFORMANCE ORDER
1. Remove an insert of a wheel niche of the right forward wheel.
2. Disconnect the socket of connection of the compressor.
3. Disconnect hoses, turn off fixing screws and remove the compressor.

Installation

Installation is carried out to sequences, return to removal.

CONNECTING TUBE

Removal

PERFORMANCE ORDER
1. Disconnect a tube from the compressor and from valves on shock-absorbers.
2. Disconnect a tube from a tee.
3. Get a tube from fixing clips and remove it from the car.

Installation

Installation is carried out to sequences, return to removal.

SENSOR OF HEIGHT OF THE BACK SUSPENSION BRACKET

Removal

PERFORMANCE ORDER
1. Disconnect the socket of connection of the sensor.
2. Disconnect a connecting link from the spherical hinge on the sensor lever.
3. Turn off fixing screws and remove the sensor.

Installation

Installation is carried out to sequences, return to removal.