| 1. Get a semi-axis from a nave of a back wheel. |
| 2. Remove a support of a brake and a brake disk. |
| 3. Remove a rope of the hand brake from the lever. |
| 4. Disconnect the socket of connection of the sensor of height of a back suspension bracket. Mark position of the lever of the sensor and disconnect it from connecting draft of the stabilizer of cross-section stability. |
| 5. Remove a nave of a back wheel and a brake guard. |
| 6. Disconnect draft from the suspension bracket lever. |
| 7. Lower a back part of an exhaust system. |
| 8. Disconnect connecting draft of the stabilizer of cross-section stability from the suspension bracket lever. |
| 9. Remove a suspension bracket spring. |
| 10. Establish a support under differential. Remove the central bearing of the driveshaft from the body bottom. |
| 11. Turn off forward fixing bolts of a cross-piece of a back suspension bracket and lower a cross-piece together with differential a little. |
| 12. Turn off sharnirny bolts and remove the suspension bracket lever. Replace plugs if it is necessary. |