Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
- 10. Main transfer, semi-axes
   10.1. Technical characteristics
   10.2. Main transfer
   10.3. Dempfernye of the plug of the main transfer
   10.4. Laying of a back cover of the main transfer
   10.5. Epiploon of a leading gear wheel of the main transfer
   10.6. Epiploons of bearings of semi-axes
   10.7. Semi-axis
   10.8. Boots of a semi-axis and external CV JOINT
   10.9. Driveshaft
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
Проститутки в спб по материалам сайта.


10.9. Driveshaft

Removal

PERFORMANCE ORDER
1. Remove heat-shielding screens of catalytic converters.
2. Turn off bolts (are specified by shooters), fixing the driveshaft to a transmission flange.
3. Turn off bolts (are specified by shooters), fixing the driveshaft to a differential flange.
3. Turn off fixing bolts of an intermediate support (are specified by shooters) and remove the driveshaft.

Installation

Installation is carried out to sequences, return to removal.

CENTRAL BEARING OF THE DRIVESHAFT

Replacement

PERFORMANCE ORDER
1. Remove the driveshaft.
2. Mark an arrangement of sections of the driveshaft and disconnect forward section.
3. Remove a cover, a lock ring and a washer.
4. Remove a bearing casing from a fixing arm.
5. Squeeze out the old bearing and напрессуйте the new.
6. Assembly is carried out upside-down. For the correct installation of forward section of the driveshaft serves directing shlitsa (it is specified by an arrow).

FLEXIBLE CONNECTING DISKS OF THE DRIVESHAFT

Replacement

PERFORMANCE ORDER
1. Disconnect a semi-axis from a transmission or differential flange.
2. Take a shaft aside and remove the corresponding disk, having picked up it a screw-driver if it is necessary.
3. Installation is carried out to sequences, return to removal.