Opel Omega

since 1993-1999 of release

Repair and car operation

Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
- 10. Main transfer, semi-axes
   10.1. Technical characteristics
   10.2. Main transfer
   10.3. Dempfernye of the plug of the main transfer
   10.4. Laying of a back cover of the main transfer
   10.5. Epiploon of a leading gear wheel of the main transfer
   10.6. Epiploons of bearings of semi-axes
   10.7. Semi-axis
   10.8. Boots of a semi-axis and external CV JOINT
   10.9. Driveshaft
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment

10.8. Boots of a semi-axis and external CV JOINT

Replacement

PERFORMANCE ORDER

1. Remove a semi-axis and clamp it in a vice.

2. Bring down a casing from the external hinge.

3. Remove collars from boots.

4. Cut off old boots and clear hinges of greasing.

5. Remove a lock ring and beat out a semi-axis from the external hinge.

6. Fill the internal hinge with greasing and establish a new boot, having fixed it collars.

7. Put on an external boot a semi-axis.

8. Establish the new external hinge and fix it by means of a lock ring. Fill the hinge with greasing.

9. Establish a boot of the external hinge on a place and tighten collars.

10. Establish a casing on the external hinge and replace an internal lock ring of a semi-axis.

11. Establish a semi-axis on the car.