Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
- 10. Main transfer, semi-axes
   10.1. Technical characteristics
   10.2. Main transfer
   10.3. Dempfernye of the plug of the main transfer
   10.4. Laying of a back cover of the main transfer
   10.5. Epiploon of a leading gear wheel of the main transfer
   10.6. Epiploons of bearings of semi-axes
   10.7. Semi-axis
   10.8. Boots of a semi-axis and external CV JOINT
   10.9. Driveshaft
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment


10.3. Dempfernye of the plug of the main transfer


FORWARD PLUG

Replacement

PERFORMANCE ORDER
1. Establish a support under the main transfer and disconnect sockets of connection of ABS sensors.
2. Turn off fixing bolts and omit the main transfer a little.
3. Turn off fixing bolts and remove a fixing arm of the plug. Replace the plug.

BACK PLUGS

Installation of new plugs

The distance of I plugs between internal edges should equal 300–302 mm.

Replacement

PERFORMANCE ORDER
1. Remove the main transfer.
2. Remove the fuel filter from fastenings and clean it aside.
3. Squeeze out plugs from a cross-piece of a back suspension bracket.
4. Napressuyte new plugs so that the distance between their internal edges equaled 300–302 mm.
5. Establish the main transfer into place.