Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
- 5. Fuel, exhaust systems
+ 5.1. Petrol engines
+ 5.2. Diesel engine in volume 2,0 liters
- 5.3. Diesel V6 2,5-liter engine
5.3.1. Principle of operation of the diesel engine
5.3.2. Turbokompressor
5.3.3. System of a retsirkulyatsiya of the fulfilled gases (EGR system)
5.3.4. Device of preheat of diesel engines
5.3.5. System prednakala/glow plugs
5.3.6. Relay of system of preheat
5.3.7. Air removal from a power supply system
5.3.8. Fuel pump of a high pressure (TNVD)
5.3.9. Nozzles
5.3.10. Check / adjustment of the beginning of giving of TNVD
5.3.11. Inlet collector
5.3.12. Main malfunctions of diesel system of injection
5.3.13. System of production of the fulfilled gases of diesel engines
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
|
If once the tank was emptied or if the power supply system detail was replaced, as a rule, the system is not pumped over, as it is pumped over automatically during start-up.
If the power supply system automatically was not pumped over, it is necessary to execute the following.
| PERFORMANCE ORDER |
Prevention
At work with system of injection observe purity.
Watch, that diesel fuel did not get on hoses of cooling liquid. If necessary hoses clear.
|
|
1. Unscrew a bolt (1) fuel filter approximately on 2 turns. |
| 2. Include a starter, wait, while fuel will not flow out – substitute the tank. |
| 3. Screw up a bolt. |
| |
4. While the starter works, all pipelines of system of the injection, going to a nozzle, release and again tighten with effort of 25 N of m after fuel will flow out. |
| 5. Wipe the flowed-out fuel. |
|
|
|