Opel Omega

since 1993-1999 of release

Repair and car operation

Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
- 5. Fuel, exhaust systems
   + 5.1. Petrol engines
   - 5.2. Diesel engine in volume 2,0 liters
      5.2.1. Technical characteristics
      5.2.2. Air filter and air inlet channels
      5.2.3. Accelerator pedal
      5.2.4. Filling and pumping of fuel system
      5.2.5. Fuel level sensor
      5.2.6. Fuel tank
      5.2.7. Check and adjustment of the maximum turns
      5.2.8. Electric knots of system of injection
      5.2.9. Fuel pump of a high pressure
      5.2.10. Moment of injection of fuel
      5.2.11. Fuel nozzles
      5.2.12. Turbonagnetatel
      5.2.13. Inlet collector
      5.2.14. Final collector
   + 5.3. Diesel V6 2,5-liter engine
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment

5.2.9. Fuel pump of a high pressure

Removal and installation

PERFORMANCE ORDER

1. Remove an inlet collector.
	2. Disconnect from the fuel pump of a high pressure submitting and returnable fuel pipes (shooters specified bolts of fastening of pipes).
3. Remove the top chain and asterisks.
	4. Through an opening in the bottom asterisk unscrew bolts (1) fastening of a forward part of the fuel pump.
	5. Unscrew bolts (are specified by shooters) and remove a fastening arm from a back part of the fuel pump.
	6. Remove the fuel pump together with a sealing ring (it is specified by an arrow).
7. Before installation check that the safety lock in a ledge of an asterisk of the fuel pump is combined with an opening of the case of the pump, and check that the camshaft and a cranked shaft are established in the situation corresponding to the top dead point of the first cylinder in a step of compression.
8. Establish a new sealing ring on the fuel pump.
9. Establish the fuel pump, combining the bottom asterisk of a chain with a pump ledge, and fix the pump bolts. Establish a back arm of the fuel pump and fix bolts.
10. Establish the top chain and asterisks.
11. Screw on the fuel pump fuel tubes.
12. Establish an inlet collector.
13. Connect the accumulator, start the engine and check tightness of fuel system.