Opel Omega

since 1993-1999 of release

Repair and car operation

Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
- 5. Fuel, exhaust systems
   + 5.1. Petrol engines
   - 5.2. Diesel engine in volume 2,0 liters
      5.2.1. Technical characteristics
      5.2.2. Air filter and air inlet channels
      5.2.3. Accelerator pedal
      5.2.4. Filling and pumping of fuel system
      5.2.5. Fuel level sensor
      5.2.6. Fuel tank
      5.2.7. Check and adjustment of the maximum turns
      5.2.8. Electric knots of system of injection
      5.2.9. Fuel pump of a high pressure
      5.2.10. Moment of injection of fuel
      5.2.11. Fuel nozzles
      5.2.12. Turbonagnetatel
      5.2.13. Inlet collector
      5.2.14. Final collector
   + 5.3. Diesel V6 2,5-liter engine
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment

5.2.2. Air filter and air inlet channels

Removal

PERFORMANCE ORDER

	1. Remove a weight wire from the accumulator and disconnect electric sockets from a measuring instrument of a stream of air and the sensor (it is specified by an arrow) temperatures of arriving air.
	2. Disconnect a hose of ventilation of a case from the inlet channel, weaken collars and remove the air channel together with a measuring instrument of a stream of air.
3. Uncover the air filter and take filtering element, noting its arrangement. Unscrew nuts and remove the case of the air filter.
4. On engines of a turbo of low pressure to remove tubes of supply of the air, connecting a turbonagnetatel and an inlet collector, unscrew screws and remove a plastic casing from the top part of the engine.
	5. Weaken a collar of fastening of a pipe of supply of air to a collector.
	6. Unscrew bolts (supply of air fixing a pipe to a head cover is specified by shooters), then disconnect a pipe of supply of air from a turbonagnetatel.
	7. Remove a pipe of supply of air.
	8. Remove a sealing ring (it is specified by an arrow) which is established between a pipe and a turbonagnetatel.
9. On engines of a turbo of a high pressure the pipes connecting the heat exchanger and a collector and pipes of a turbonagnetatel, can be to remove after weakening of collars. For removal of a metal pipe weaken a clip and remove a pipe from a turbonagnetatel.
10. Remove a sealing ring which is established between a pipe and a turbonagnetatel.

Installation

PERFORMANCE ORDER

Installation is made in sequence, to removal, thus it is necessary to replace with return a sealing ring on a turbonagnetatel.