Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
- 9. Transmissions
   + 9.1. Mechanical transmission
   - 9.2. Automatic transmission
      9.2.1. Technical characteristics
      9.2.2. Transmission liquid
      9.2.3. Gear shifting mechanism
      9.2.4. Gear shifting lever
      9.2.5. Epiploons
      9.2.6. Radiator of transmission liquid
      9.2.7. Electric elements of the monitoring system of a transmission
      9.2.8. Automatic transmission
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
http://ladyfor.ru



9.2.2. Transmission liquid

GENERAL INFORMATION

The automatic transmission has no drain opening therefore if you need to merge transmission liquid, for this purpose it is necessary to remove the main pallet, and at need and intermediate.

Cлив and filling

PERFORMANCE ORDER
1. Lift and fix a forward part of the car.
2. Unscrew an opening cap for check of level of liquid.
3. Merge liquid in suitable capacity.
4. Unscrew bolts of the pallet of a transmission. Remove the pallet and its laying.
5. Unscrew bolts of the intermediate pallet and remove it. Merge liquid in the capacity prepared for this purpose.
6. Unscrew fastening bolts (are specified by shooters).
7. Remove the transmission filter. Clean and examine the filter, if necessary replace it.
8. Carefully clean both pallets. Clean off metal particles from a magnet established in the pallet. Clean carvings of bolts of pallets.
9. Establish the filter and tighten its bolts.
10. Establish the intermediate pallet together with new laying. Put hermetic N15 10 181 on carvings of bolts and tighten bolts till the necessary moment of an inhaling.
11. Establish laying on the main pallet. Put hermetic on bolts. Establish the pallet and tighten bolts.
12. Fill in transmission liquid of the necessary brand and check its level.
13. Pass small distance and again check liquid level.