Opel Omega

since 1993-1999 of release

Repair and car operation


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
- 9. Transmissions
   - 9.1. Mechanical transmission
      9.1.1. Technical characteristics
      9.1.2. Transmission oil
      9.1.3. Gear shifting mechanism
      9.1.4. Gear shifting lever
      9.1.5. Epiploons
      9.1.6. Switch of fires of lamps of a backing
      9.1.7. Mechanical transmission
   + 9.2. Automatic transmission
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment



9.1.5. Epiploons

EPIPLOON OF THE FLANGE OF THE DRIVESHAFT

Replacement

PERFORMANCE ORDER
1. Disconnect a forward part of the driveshaft from a flange of a transmission and remove the shock-absorber. If necessary completely remove the driveshaft.
2. Stop a conducted shaft.
3. Braid a nut (drawing at the left) and remove a flange (drawing on the right).
4. Take an epiploon from a transmission casing.
5. Examine a flange on existence of damages, if necessary replace it.
6. Clean an epiploon groove, a shaft and nut carving.
7. Grease a new epiploon with greasing and establish it into place.
8. Establish a driveshaft flange.
9. Put hermetic N15 10 181 on a carving of a nut and tighten a nut.

EPIPLOON OF THE LEADING SHAFT

Replacement
PERFORMANCE ORDER
1. Remove vyzhimny the coupling cylinder.
2. Take an old epiploon.
3. Clean an epiploon groove, grease a new epiploon with greasing and establish it into place.