Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
- 5. Fuel, exhaust systems
   - 5.1. Petrol engines
      5.1.1. Technical characteristics
      5.1.2. Unleaded gasoline
      5.1.3. Systems of injection of fuel
      5.1.4. Air filter and air branch pipes
      5.1.5. Accelerator rope
      5.1.6. Accelerator pedal
      5.1.7. Pressure release from system of injection of fuel
      5.1.8. Fuel pump
      5.1.9. Fuel level sensor
      5.1.10. Fuel tank
      5.1.11. Butterfly valve case
      + 5.1.12. Elements of system of injection of fuel (engine in volume of 2,0 l)
      5.1.13. Inlet collector
      5.1.14. Final collector
      5.1.15. Multiline system of supply of air
      5.1.16. System of production of the fulfilled gases
      - 5.1.17. Systems of decrease in toxicity of exhausts
         5.1.17.1. Technical characteristics
         5.1.17.2. Check of systems of decrease in toxicity of exhausts
         5.1.17.3. Elements of system of decrease in toxicity of exhausts
         5.1.17.4. Elements of system of collecting паров fuels
         5.1.17.5. Elements of system of a retsirkulyatsiya of exhaust gases
         5.1.17.6. Elements of system of additional supply of air
         5.1.17.7. Catalytic converter
   + 5.2. Diesel engine in volume 2,0 liters
   + 5.3. Diesel V6 2,5-liter engine
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment



5.1.17.4. Elements of system of collecting паров fuels

COAL FILTER

Removal and installation

PERFORMANCE ORDER
1. Remove the right forward wheel.
2. Turn off fixing nuts and squeeze out pins.
3. Remove external parts of fastenings.
4. Remove an insert of a wheel niche of the right forward wheel.
5. Turn off a fixing nut.
6. Remove the coal filter (it is specified by an arrow) from fastenings. Mark and disconnect hoses.
7. Installation is carried out to sequences, return to removal.

BLOWING-OFF VALVE

Valve arrangement on l engines 2,5 and 3,0

On engines in volume of 2,5 and 3,0 l the blowing-off valve (it is specified by an arrow) is located behind a head of the block of cylinders.

Removal and installation

PERFORMANCE ORDER
SOHC engine in volume of 2,0 l
1. Disconnect the socket of connection of the valve.
2. Disconnect hoses from the valve, turn off fixing screws and remove the valve.
3. Installation is carried out to sequences, return to removal.
DOHC engine in volume of 2,0 l
4. Disconnect the socket of connection of the valve.
5. Turn off fixing screws and remove the valve together with a fixing arm from a head of the block of cylinders.
6. Mark and disconnect vacuum hoses.
7. Installation is carried out to sequences, return to removal.
Engines in volume of 2,5 and 3,0 l
8. Remove the top section of an inlet collector.
9. Turn off a fixing bolt of the valve, disconnect the socket of connection and hoses.
10. Installation is carried out to sequences, return to removal.