Opel Omega

since 1993-1999 of release

Repair and car operation

Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
- 5. Fuel, exhaust systems
   - 5.1. Petrol engines
      5.1.1. Technical characteristics
      5.1.2. Unleaded gasoline
      5.1.3. Systems of injection of fuel
      5.1.4. Air filter and air branch pipes
      5.1.5. Accelerator rope
      5.1.6. Accelerator pedal
      5.1.7. Pressure release from system of injection of fuel
      5.1.8. Fuel pump
      5.1.9. Fuel level sensor
      5.1.10. Fuel tank
      5.1.11. Butterfly valve case
      + 5.1.12. Elements of system of injection of fuel (engine in volume of 2,0 l)
      5.1.13. Inlet collector
      5.1.14. Final collector
      5.1.15. Multiline system of supply of air
      5.1.16. System of production of the fulfilled gases
      - 5.1.17. Systems of decrease in toxicity of exhausts
         5.1.17.1. Technical characteristics
         5.1.17.2. Check of systems of decrease in toxicity of exhausts
         5.1.17.3. Elements of system of decrease in toxicity of exhausts
         5.1.17.4. Elements of system of collecting паров fuels
         5.1.17.5. Elements of system of a retsirkulyatsiya of exhaust gases
         5.1.17.6. Elements of system of additional supply of air
         5.1.17.7. Catalytic converter
   + 5.2. Diesel engine in volume 2,0 liters
   + 5.3. Diesel V6 2,5-liter engine
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment

5.1.17.3. Elements of system of decrease in toxicity of exhausts

GENERAL INFORMATION

CATALYTIC CONVERTER

The catalytic converter is a part of a reception pipe of an exhaust system (see subsection 5.1.17.7).

OXYGEN SENSOR

Removal and installation

PERFORMANCE ORDER

	1. Disconnect the socket of connection of the sensor (it is specified by an arrow).
	2. Unscrew the sensor (it is specified by an arrow) from a reception pipe of an exhaust system.
3. Installation is carried out to sequences, return to removal.