Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
- 2. Maintenance
   - 2.1. Cars with petrol engines
      2.1.1. Technical characteristics
      2.1.2. Current maintenance
      + 2.1.3. Through 8000 km of run or each 6 months
      - 2.1.4. Through 16 000 km of run or each 12 months
         2.1.4.1. Light and alarm equipment
         2.1.4.2. Lobbies and back brakes
         2.1.4.3. Driving belt
         2.1.4.4. Hoses and connections
         2.1.4.5. Corrosion-resistant coating of a body
         2.1.4.6. Hand brake
         2.1.4.7. Suspension bracket and steering
         2.1.4.8. Moments of an inhaling of bolts of fastening of wheels
         2.1.4.9. Adjustment of headlights of head light and front position lamps
         2.1.4.10. Car check in road conditions
         2.1.4.11. Adjustment of wheels
         2.1.4.12. System of production of the fulfilled gases
      + 2.1.5. Through 32 000 km of run or each 2 years
      + 2.1.6. Through 64 000 km of run or each 4 years
      + 2.1.7. Through 112 000 km of run or each 7 years
      + 2.1.8. Each 2 years irrespective of run
   + 2.2. Cars with diesel engines
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment



2.1.4.3. Driving belt

Check

The driving belt is necessary for examining regularly on all length and if it is worn-out or damaged, it is necessary to replace it.

PERFORMANCE ORDER
1. On the engine in volume of 2,0 l check, that the index of the lever of a natyazhitel (2) was located between an emphasis (1 and 3). Replace a belt if it is worn-out or the lever of a natyazhitel concerns an emphasis.
2. On engines in volume of 2,5 and 3,0 l check, that the emphasis (1) was between ledges (2) on the lever. Replace a belt if it is worn-out or the lever of a natyazhitel concerns an emphasis.

Replacement

PERFORMANCE ORDER
Engine in volume of 2,0 l
1. Take aside a pulley of a natyazhitel, having put on a key the central bolt of a pulley, and remove a belt. Block a natyazhitel in this situation and put on a new belt. Release a natyazhitel.
Engines in volume of 2,5 and 3,0 l
2. Remove the air chamber and a forward tube of system of a fence of air.
3. Take aside a pulley of a natyazhitel, having put on a key the central bolt of a pulley, and remove a belt. Put on a new belt and release a natyazhitel.