Opel Omega

since 1993-1999 of release

Repair and car operation



Opel Omega
+ 1. Maintenance instruction
- 2. Maintenance
   - 2.1. Cars with petrol engines
      2.1.1. Technical characteristics
      2.1.2. Current maintenance
      - 2.1.3. Through 8000 km of run or each 6 months
         2.1.3.1. Engine oil and filter
      + 2.1.4. Through 16 000 km of run or each 12 months
      + 2.1.5. Through 32 000 km of run or each 2 years
      + 2.1.6. Through 64 000 km of run or each 4 years
      + 2.1.7. Through 112 000 km of run or each 7 years
      + 2.1.8. Each 2 years irrespective of run
   + 2.2. Cars with diesel engines
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment


2.1.3. Through 8000 km of run or each 6 months

2.1.3.1. Engine oil and filter

GENERAL INFORMATION

Regular replacement of oil and the oil filter is one of the most important operations for extension of service life of the car.

Replacement

PERFORMANCE ORDER
1. Warm up the engine. Remove a cap of a jellied mouth. Turn off a cap of a drain opening approximately on a half of turn. Establish the container for collecting oil and completely unscrew a cap.
2. Wait, while oil will flow down, moving the container if it is necessary.
3. Wipe a cap and replace a sealing washer if it is necessary. Wipe area round a drain opening and twirl a cap till the demanded moment of an inhaling.
4. Establish the container for collecting oil under the oil filter.
5. Using the tool for removal of the oil filter if it is necessary, weaken an inhaling of the filter and unscrew it a hand (in drawing is shown the arrangement of the oil filter on the engine in volume of 2,0 l).
6. Clear a filter installation site. Oil a sealing ring of the new filter and establish it on the engine. Reliably twirl the filter a hand.
7. Turn off a cap of a jellied mouth and fill in oil of demanded type.
8. Start the engine and check, whether there is no leakage of oil round the oil filter and a cap of a drain opening.