Opel Omega

since 1993-1999 of release

Repair and car operation


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
- 14. Body electric equipment
   14.1. Technical characteristics
   14.2. Search of a source of malfunction in electric equipment system
   14.3. Safety locks and relay
   14.4. Switches
   14.5. Bulbs (external lighting devices)
   14.6. Bulbs (internal lighting)
   14.7. External lighting devices
   14.8. Adjustment of headlights of head light
   14.9. Instrument guard
   14.10. Elements of an instrument guard
   14.11. Hours / multipurpose display
   14.12. Lighter
   14.13. System of adjustment of xenon headlights
   14.14. Horns of a sound signal
   14.15. Levers of screen wipers
   14.16. Engine, connecting mechanism of a screen wiper of a windscreen
   14.17. Engine of a screen wiper of back glass
   14.18. Washers of wind glass / back glasses / headlights of head light
   14.19. Radio receiver / cassette / CD player
   14.20. Loudspeakers
   14.21. Radio antenna
   14.22. System of the anticreeping alarm system and engine immobilizer
   14.23. System of airbags of safety
   14.24. Elements of system of airbags of safety
   14.25. System elements cruise control
   + 14.26. Electric equipment schemes



14.5. Bulbs (external lighting devices)

GENERAL INFORMATION
Prevention

At replacement of bulbs try not to concern some glass of bulbs fingers.

Be accurate not to burn.

Use bulbs of the demanded capacity.

HEADLIGHTS OF HEAD LIGHT (BULB OF THE PASSING BEAM)

Replacement of bulbs

PERFORMANCE ORDER
Models with usual headlights
1. Remove the top casing of a headlight.
2. Remove a back casing of a headlight.
3. Disconnect the connection socket.
4. Remove a fixing clip.
5. Remove a bulb.
6. At installation of a new bulb use a scarf not to concern some bulb glass.
7. Installation is carried out to sequences, return to removal.
Models with xenon headlights
8. Remove a casing from above headlights.
9. Turn off fixing screws and remove a casing behind a headlight.
10. Turn a cartridge with a bulb to the left and remove it.
11. Turn a fixing ring to the left and remove it.
12. Remove a bulb.
13. Installation is carried out to sequences, return to removal.

HEADLIGHTS OF HEAD LIGHT (BULB OF THE DRIVING BEAM)

Replacement of bulbs

PERFORMANCE ORDER
Models with usual headlights
1. Remove casings from above and behind a headlight.
2. Disconnect the connection socket.
3. Press on a bulb and remove it.
4. Installation is carried out to sequences, return to removal.
Models with xenon headlights
5. See above.

FRONT POSITION LAMPS

Replacement of bulbs

PERFORMANCE ORDER
1. Remove a casing behind a headlight.
2. Get a cartridge with a bulb.
3. Get a bulb from the boss.
4. Installation is carried out to sequences, return to removal.

FORWARD INDEXES OF TURNS

Replacement of bulbs

PERFORMANCE ORDER
1. Remove a casing from above headlights.
2. Turn a cartridge counter-clockwise and get it.
3. Press on a bulb, turn it and get from the boss.
4. Installation is carried out to sequences, return to removal.

FORWARD ANTIFOG LAMPS

Replacement of bulbs

PERFORMANCE ORDER
1. Turn off fixing screws and remove a lattice near a lamp.
2. Turn off fixing screws and get a lamp.
3. Turn a cap and remove it from a lamp.
4. Disconnect the connection socket.
5. Release a fixing clip.
6. Remove a bulb.
7. Installation is carried out to sequences, return to removal.
8. At installation of a lamp check, that latches (are specified by shooters) got to grooves on a bumper.

FORWARD LATERAL INDEXES OF TURNS

Replacement of bulbs

PERFORMANCE ORDER
1. Remove a lamp from a forward wing by means of a small screw-driver.
2. Turn and remove a rasseivatel.
3. Get a bulb.
4. Installation is carried out to sequences, return to removal.

BACK BLOCK HEADLIGHT (BACK WING)

Replacement of bulbs

PERFORMANCE ORDER
1. Remove the lateral panel of furnish of a luggage carrier.
2. Wring out a latch and get a cartridge.
3. Press on a bulb, turn and get it.
4. Installation is carried out to sequences, return to removal.

BACK BLOCK HEADLIGHT (TRUNK LID)

Replacement of bulbs

PERFORMANCE ORDER
1. Open a trunk lid.
2. Wring out latches and get a cartridge.
3. Press on a bulb, turn and get it.
4. Installation is carried out to sequences, return to removal.

BULBS OF ILLUMINATION OF BACK REGISTRATION PLATE (MODEL WITH THE TYPE BODY THE SEDAN)

Replacement

PERFORMANCE ORDER
1. Open a trunk lid, wring out a latch and remove a lamp.
2. Remove a rasseivatel.
3. Get a bulb.
4. Installation is carried out to sequences, return to removal.

BULBS OF ILLUMINATION OF BACK REGISTRATION PLATE (MODEL WITH THE TYPE BODY THE VERSATILE PERSON)

Replacement

PERFORMANCE ORDER
1. Open a back door, turn off fixing screws and remove a lamp.
2. Remove a bulb.
3. Installation is carried out to sequences, return to removal.

THE TOP LAMP OF THE STOPLIGHT (MODEL WITH THE TYPE BODY THE SEDAN)

Replacement of bulbs

PERFORMANCE ORDER
1. Remove a lamp casing.
2. Disconnect the connection socket.
3. Remove the holder of bulbs from a casing.
4. Remove a bulb.
5. Installation is carried out to sequences, return to removal.

THE TOP LAMP OF THE STOPLIGHT (MODEL WITH THE TYPE BODY THE VERSATILE PERSON)

Replacement of bulbs

PERFORMANCE ORDER
1. Remove the central section of the top panel of furnish of a back door.
2. Get a cartridge and replace a bulb.