Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
- 4. Heating system and ventilation
4.1. Technical characteristics
4.2. Radiator
4.3. Cooling (е) the fan (ы)
4.4. Thermostat
4.5. The pump of cooling liquid
4.6. Broad tank
4.7. Sensor of the temperature indicator
4.8. Elements of heating systems and ventilation
4.9. Heater radiator
4.10. Motor of the delivery fan and consecutive resistor
4.11. Air central air
4.12. Elements of central air of air
4.13. Elements of the electronic monitoring system of climate
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
|
Removal
| PERFORMANCE ORDER |
| 1. On all models the sensor is located in a back part of the block of cylinders between heads of cylinders. To open access to the sensor, remove the top part of an inlet collector. |
| 2. Uncover a jellied mouth of a radiator or a broad tank to pit pressure in system of cooling of the engine. |
| 3. Disconnect a wire from the sensor. |
| 4. Unscrew the sensor and remove a sealing ring. |
|
Installation
Installation is carried out to sequences, return to removal.
|
|