Opel Omega

since 1993-1999 of release

Repair and car operation


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
- 4. Heating system and ventilation
   4.1. Technical characteristics
   4.2. Radiator
   4.3. Cooling (е) the fan (ы)
   4.4. Thermostat
   4.5. The pump of cooling liquid
   4.6. Broad tank
   4.7. Sensor of the temperature indicator
   4.8. Elements of heating systems and ventilation
   4.9. Heater radiator
   4.10. Motor of the delivery fan and consecutive resistor
   4.11. Air central air
   4.12. Elements of central air of air
   4.13. Elements of the electronic monitoring system of climate
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment



4.2. Radiator

Removal

SIX-CYLINDER MODELS

PERFORMANCE ORDER
1. Merge cooling liquid from system of cooling of the engine.
2. Unscrew screws and remove the top cover of a radiator.
3. Remove the accumulator.
4. Remove the preliminary chamber of multiline system of a fence of air.
5. Disconnect wires from switches of the cooling fan
6. Disconnect wires from the locking valve of system of secondary air.
7. Disconnect wires from the additional water pump.
8. Disconnect from a radiator top (drawing at the left) and bottom hoses (drawing on the right).
9. Disconnect from a radiator a hose of a broad tank.
10. Disconnect hoses from the locking valve of system of secondary air.
11. Unscrew a bolt and disconnect the kondensatsionny block of a coolant from a radiator.
12. In models with an automatic transmission disconnect hoses from a radiator of transmission liquid.
13. Compress spring fastenings in the top part of a radiator.
14. Remove a radiator together with cooling fan.

FOUR-CYLINDER MODELS

PERFORMANCE ORDER
1. Merge cooling liquid from cooling system.
2. Disconnect a wire of the minus plug of the accumulator.
3. Disconnect wires from the main cooling fans and from switches of fans.
4. Disconnect all hoses from a radiator.
5. Unscrew screws and disconnect the heat exchanger of the air conditioner from a radiator.
6. In models with an automatic transmission disconnect hoses from a radiator of transmission liquid.
7. Remove a radiator together with cooling fan.

Installation

Installation is carried out to sequences, return to removal.