+ 1. Maintenance instruction
- 2. Maintenance
+ 2.1. Cars with petrol engines
+ 2.2. Cars with diesel engines
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, semi-axes
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
In this section the information necessary for the owner of the car Opel the Omega and updatings for maintenance of high operational qualities of the car, its profitability, traffic safety and durability are supplied.
Below the main terms of maintenance with the list of necessary works are specified, and subsections with the description of the maintenance of each type of works further follow. Visual checks, adjustments, replacement of knots which are included in the description along with other useful recommendations belong to these works. Maintenance of the car is planned according to run or operation term, and the sequence of operations is given in the subsequent subsections on leaving and the service which performance will allow to keep long time the car in good repair. The order of service is constructed so that obliges to carry out service of all units of the car in the specified terms, neglect care of separate systems and units reduces efficiency of maintenance.
At car service you will find out that the majority of works can and should be carried out in common. It is connected with that the order of performance of separate procedures almost differs nothing, or that units absolutely different to destination settle down nearby.
For example, if you lifted the car for any reason, that, being under the car, you should check at the same time at once both an exhaust system, and a suspension bracket, both a steering, and details of fuel system. At the shift of wheels interfaced to their removal, it is expedient to check a condition of brakes and bearings of naves.
At last, let us assume, that you borrowed or hired a dinamometrichesky key. If you need to tighten only candles, at the same time you also can check and the moments of an inhaling of other fixing elements.
The first step on works of this program of maintenance is your self-preparation. Study all sections concerning procedures which you are going to execute, make the list and prepare all spare parts and the tools necessary for work. If it seems to you that at procedure performance you cannot independently consult with any part of works, address for consultation in local shop on sale of spare parts or in department of service of your dealer.